1、Index parameter

Rated temperature: 850 degrees centigrade; maximum temperature: 1050 C

Effective height: 140mm

Net band width: 700mm

Furnace structure: large furnace chamber, super light insulation material masonry structure.

Maximum load: 50Kg/

Speed range: 70 ~ 400mm/min, typical belt speed: 170 ~ 250mm/min; variable frequency stepless speed regulation.

Heating elements: infrared tube FEC heater heating, heating on the drying area, heating up and down in the sintering area.

Sintering atmosphere: dry compressed air

Gas path composition: 11 way intake, each flow can be adjusted (see 3.2 technical specification).

Cooling mode: cooling by heat insulation, air cooling and water cooling, cooling water jacket 1 points water temperature detection.

Temperature control stability: + 1 c

2、Progressiveness

According to the process requirements, the lamp tube and FEC ceramic fiber heater are heated. According to the technology of LTCC, thick film heater and chip element, the drying and sintering temperature zone and gas path are adjusted. The position and quantity of the exhaust port are determined according to the size of the discharge, the temperature and speed are accurately controlled, the light material is used in the ring protection, the energy saving and environmental protection, and the convenience and reliability are used. Long life.

3、Scene and detail display