1、Index parameter

Rated temperature: rt-1050 C

Maximum temperature: 1050 degrees centigrade

Sintering atmosphere: air

Heating element: heating FEC ceramic fiber heater

Control temperature area: 7-11

Furnace height: 50-100mm

Temperature zone length: 300/450/600mm

Net band width: 200-1000MM

Outline size: L (6090-7385mm) *W (1200-1400mm) *H1350mm

2、Progressiveness

1, high temperature uniformity: 900mm bandwidth, uniformity of + 2 degrees C, sintered resistance resistance deviation is less than or equal to 3%;

2, special inlet and exhaust structure design, exhaust unobstructed, sintered porcelain without pollution.

3. Precise process control. The holding time at 850 C can reach + 1min.

4. The temperature rise and fall rate is controllable, and with special transmission structure design, the transmission is stable, and the fragmentation rate caused by the equipment is zero.

5, adapt to the development of technology, can be made into nitrogen furnace for sintering copper slurry products.

3、Detail display

四、Application field